Webocreation

Tuesday, July 21, 2009

MIME AND ITS TYPE

MIME Overview
by Mark Grand
Internet e-mail allows mail messages to be exchanged between users of computers around
the world and occasionally beyond… to space shuttles. One of the main reasons that
Internet e-mail has achieved such wide use is because it provides a standard mechanism
for messages to be exchanged between over 1,000,000 computers connected to the
Internet.
The standards that are the basis for Internet e-mail were established in 1982. Though they
were state of the art in 1982, in the intervening years they have begun to show their age.

The 1982 standards allow for mail messages that contain a single human readable message
with the restrictions that:
• the message contains only ASCII characters.
• the message contains no lines longer than 1000 characters.
• the message does not exceed a certain length
The 1982 standards do not allow EDI to be transmitted through Internet mail, since EDI
messages can violate all of these restrictions. There are a number of other types of
messages and services that have are supported by other mail standards that have been
designed more recently. In June of 1992 a new Internet mail standard was approved. This
new standard is called MIME.
MIME is an acronym for Multipurpose Internet Mail Extensions. It builds on the older
standard by standardizing additional fields for mail message headers that describe new
types of content and organization for messages.
MIME allows mail messages to contain:
• Multiple objects in a single message.
• Text having unlimited line length or overall length.
• Character sets other than ASCII.
• Multi-font messages.
• Binary or application specific files.
• Images, Audio, Video and multi-media messages.
MIME defines the following new header fields:
1. A MIME-Version header field, which uses a version number to declare that a
message conforms to the MIME standard.
2. A Content-Type header field, which can be used to specify the type and subtype
of data in the body of a message and to fully specify the encoding of such data.
2.a. A Text Content-Type value, which can be used to represent textual
information in a number of character sets and formatted text description
languages in a standardized manner.
2.b. A Multipart Content-Type value, which can be used to combine several
body parts, possibly of differing types of data, into a single message.
2.c. An Application Content-Type value, which can be used to transmit
application data or binary data.
2.d. A Message Content-Type value, for encapsulating a mail message.
2.e. An Image Content-Type value, for transmitting still image (picture) data.
2.f. An Audio Content-Type value, for transmitting audio or voice data.
2.g. A Video Content-Type value, for transmitting video or moving image
data, possibly with audio as part of the composite video data format.
3. A Content-Transfer-Encoding header field, that specifies how the data is
encoded to allow it to pass through mail transports having data or character set
limitations.
4. Two optional header fields that can be used to further describe the data in a
message body, the Content-ID and Content-Description header fields.
MIME is an extensible mechanism. It is expected that the set of content-type/subtype pairs
and their associated parameters will grow with time. Several other MIME fields, such as
character set names, are likely to have new values defined over time. To ensure that the
set of such values develops in an orderly, and public manner, MIME defines a registration
process which uses the Internet Assigned Numbers Authority (IANA) as a central registry
for such values.
To promote interoperability between implementations, the MIME standard document
specifies a minimal subset of the above mechanisms that are required for an
implementation to claim to conform to the MIME standard.
2
MIME Technical Summary
MIME is defined by an Internet standard document called RFC 1341. This document
summarizes the contents of RFC 1341. Sufficient detail is presented here to understand
the capabilities of MIME. For sufficient detail to implement MIME please read RFC 1341.
MIME allows messages to contain multiple objects. When multiple objects are in a MIME
message, they are represented in a form called a body part. A body part has a header and
a body, so it makes sense to speak about the body of a body part. Also, body parts can be
nested in bodies that contain one or multiple body parts.
The Content-Type values, subtypes, and parameter names defined in the MIME standard
are not case insensitive. However, many parameter values are case sensitive
The MIME standard is written to allow MIME to be extended in certain ways, without
having to revise the standard. MIME specifies sets of values that are allowed for various
fields and parameters. The provides a procedure for extending these sets of values by
registering them with an entity called the Internet Assigned Numbers Authority (IANA).
The MIME-Version Header Field
MIME is designed to be compatible with older Internet mail standards. In particular, it is
compatible with RFC 822. If a mail reading program receives a message that is a MIME
message then it will likely perform additional processing for the MIME message that it
would not perform for non-MIME messages. In order to allow mail reading programs to
recognize MIME messages, MIME messages are required to contain a MIME-Version
header field. The MIME-Version header field specifies the version of the MIME standard
that the message conforms to.
As of this writing there is only version (1.0) of the MIME standard. Messages that comply
with the standard must include a header field, with the following verbatim text:
MIME-Version: 1.0
The MIME-Version header field is required at the top level of a message. It is not required
for each body part of a multipart entity. It is required for the embedded headers of a body
of type "message" if and only if the embedded message is claimed to be MIME-compliant.
The Content-Type Header Field
The Content-Type field describes the data contained in the body fully enough that the
mail reader can pick an appropriate mechanism to present the data to the user, or
otherwise deal with the data in an appropriate manner.
The Content-Type header field is used to specify the nature of data in the body or body
part, by giving type and subtype identifiers, and by providing parameters that may be
3
needed for certain types. After the type and subtype names, the remainder of the header
field is a set of parameters, specified in an attribute/value notation. The set of meaningful
parameters differs for different types. The order of parameters is not significant.
Comments are allowed (in accordance with RFC 822 rules) in structured header fields by
placing them in parentheses.
The top-level Content-Type is used to declare the general type of data, while the subtype
specifies a specific format for that type of data. Thus, a Content-Type of Image/xyz is
enough to tell a mail reader that the data is an image, even if the mail reader has no
knowledge of the specific image format xyz. Such information can be used, to decide
whether or not to show a user the raw data from an unrecognized subtype — such an
action might be reasonable for unrecognized subtypes of Text, but not for unrecognized
subtypes of Image or Audio. For this reason, registered subtypes of Audio, Image, Text,
and Video, should not contain embedded information that is really of a different type.
Such compound types are usually represented using the Multipart or Application
types.
Parameters are modifiers of the content-subtype. Although most parameters make sense
only with certain content-types, others are “global” in the sense that they might apply to
any subtype. For example, the Boundary parameter, which is used to indicate how body
parts are separated from each other, makes sense only for the Multipart content-type.
The Charset parameter might make sense with several content-types.
The MIME standard defines seven content-types. The authors of the MIME standard state
that the set of seven types is “substantially complete”. They expect additional supported
types to be accommodated by creating new subtypes of the seven initial top-level types.
The MIME standard, functioning as a constitution for the MIME community, states that
new standard content types can be defined only by revising the standard (as opposed to
the registration procedure for other types of extensions). However, MIME does provide
for the use of non-standard content types. Non-standard content-types can be used, but
must be given names starting with X-. Future standard content type names will not begin
with X-.

The syntax for the content type header field is
Content-Type := type "/" subtype [";" parameter]…
The defined content types are:
Application
indicates data that does not fit into any of the other categories, such as
uninterpreted binary data or information to be processed by a mail-based
application. In addition to the following subtypes, it is likely that additional
subtypes will be defined for applications such as mail-based scheduling
systems, spreadsheets and EDI.
4
Application/Octet-Stream
indicates uninterpreted binary data, which a mail reading program
may simply offer to write the information into a file. Possible
parameters for Application/Octet-Stream include:
Name
a suggested name for the binary data if stored as a file.
Type
the general type or category of binary data. This is intended for
human recipients rather than for automated processing.
Conversions
the operations that performed on the data before putting it the
body. Note that the standard defines no conversion values.
Any conversion values that do not begin with X- must be
preceded by a published specification and by registration with
IANA.
Padding
the number of bits of padding that were appended to the
bitstream comprising the actual contents to produce the
enclosed byte-oriented data. This is useful for enclosing a
bitstream in a body when the total number of bits is not a
multiple of the byte size.
Application/ODA
indicates a body containing information encoded according to the
Office Document Architecture (ODA) standards, using the ODIF
representation format. For Application/ODA, the Content-Type
line should also specify an attribute/value pair that indicates the
document application profile (DAP), using a Profile parameter.
Thus an appropriate header field might look like this:
Content-Type: application/oda;
profile=Q112
Consult the ODA standard for further information.
Application/PostScript
indicates a body containing a postscript document.
Audio
Indicates audio data. Audio requires an audio output device (such as a
speaker or a telephone) to “display” the contents.
Audio/Basic
The content of the Audio/Basic subtype is audio encoded using 8-
bit ISDN u-law. When this subtype is present, a sample rate of 8000
Hz and a single channel is assumed.
5
Image
Image data. Image requires a display device (such as a graphical display, a
printer, or a FAX machine) to view the information.
Image/Jpeg
indicates an image in JPEG format.
Image/Gif
indicates an image in GIF format.
Message
indicates an encapsulated message.
Message/Rfc822
indicates that the body contains an encapsulated message, with the
syntax of an RFC 822 message.
Message/Partial
indicates a partial message, allowing fragmented transmission of
bodies too large to be passed through mail transport facilities.
Message/Partial indicates that the body contains a fragment of a
larger message.
Three parameters are required in a Content-Type field of type
Message/Partial: The first, Id, is a unique identifier, as close to
world-unique as possible, used to match the parts together. The
second, Number, an integer, is the part number indicating where this
part fits into the sequence of fragments. The third, Total, another
integer, is the total number of parts. Total is required on the final
part, and optional on earlier parts.
Message/External-Body
indicates that the actual body data are not included, but merely
referenced. In this case, the parameters describe a mechanism for
accessing the external data.
When a body or body part is of type Message/External-Body, it
consists of a header, a blank line, and the message header for the
encapsulated message. If another blank line appears, this ends the
message header for the encapsulated message. However, since the
encapsulated message's body is itself external, it does not appear in
the area that follows. For example, consider this message:
Content-type: message/external-body;
access-type=local-file;
name=/u/nsb/Me.gif
Content-type: image/gif
THIS IS NOT REALLY THE BODY!
6

The area at the end, which constitutes a phantom body, is ignored
for most external-body messages. However, it may be used to
contain auxiliary information for a “mail-server”.
The only parameter of Message/External-Body that is always
mandatory is Access-Type. Its other parameters are mandatory or
optional depending on the value of Access-Type. The values
defined for the Access-Type parameter are FTP, ANON-FTP, TFTP,
AFS, LOCAL-FILE, and MAIL-SERVER. Except for values beginning
with X-, other values must be registered with IANA.
The standard also specifies additional parameters that are to be
used in conjunction with the various access types.
In addition to access-type specific parameters, the standard defines
the following parameters which are optional for all access types:
• The Expiration parameter is used to specify a date after
which the existence of the external data is not guaranteed.
• The Size parameter is used to specify the size of the data.
Multipart
indicates data consisting of multiple body parts; each having its own data
type. It is possible to tell where each body part begins and ends because
each body part is preceded by a special string called an encapsulation
boundary; the last body part is followed by a closing boundary.
The boundary strings used are specified by a mandatory parameter called
Boundary. The encapsulation boundary is an end of line followed by two
hyphens followed by the boundary parameter value of the Content-Type
header field. The closing boundary is the same as the encapsulation
boundary with the addition of two hyphens at the end of the line.
The encapsulation boundary must not appear inside any of the
encapsulated parts. It is crucial that the composing user agent be able to
choose and specify the unique boundary that will separate the body parts.
Encapsulation boundaries may be no longer than 70 characters, not
counting the blank line and leading hyphens.
Thus, a typical multipart Content-Type header field might look like:
Content-Type: multipart/mixed; boundary=gc0y0pkb9ex
This indicates a body consisting of several body parts, each having a
structure syntactically identical to an RFC 822 message, except that the
header area may be completely empty, and each part is preceded by the line
--gc0y0pkb9ex
The closing boundary following the last body part indicates that no further
body parts will follow. It is identical to the preceding encapsulation
boundaries, with the addition of two more hyphens at the end of the line:
7
--gc0y0pkb9ex--
There is room for additional information prior to the first encapsulation
boundary and following the final boundary. These areas are often blank.
Anything appearing before the first or after the last boundary is ignored.
As a simple example, the following multipart message has two parts, both
plain text, one explicitly typed and one implicitly typed:
From: Nathaniel Borenstein
To: Ned Freed
Subject: Sample message
MIME-Version: 1.0
Content-type: multipart/mixed;
boundary="simple boundary"
This is the preamble. It is to be ignored, though it is
a handy place for mail composers to include an
explanatory note to non-MIME compliant readers.
--simple boundary
This is implicitly typed plain ASCII text.
--simple boundary
Content-type: text/plain; charset=us-ascii
This is explicitly typed plain ASCII text.
It DOES end with a line break.
--simple boundary--
This is the epilogue. It is also to be ignored.
The use of a Content-Type of multipart in a body part within another
multipart entity is explicitly allowed. In such cases, care must be taken to
ensure that each nested multipart entity uses a different boundary delimiter.
The use of the multipart Content-Type with only a single body part may
be useful in certain contexts, and is explicitly permitted.
Multipart/Mixed
indicates multiple independent body parts to be viewed serially.
Multipart/Alternative
is syntactically identical to Multipart/Mixed. Each part is an
“alternative” version of the same information. Mail readers should
recognize that the content of the parts are interchangeable. The
mail reader should either choose the “best” type based on the user's
environment and preferences, or offer the user the available
alternatives. Generally, choosing the best type means displaying
only the last part that can be displayed. This may be used, for
example, to send mail in a fancy text format in such a way that it
can easily be displayed anywhere:
From: Nathaniel Borenstein
To: Ned Freed
Subject: Formatted text mail
8
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary=boundary42
--boundary42
Content-Type: text/plain; charset=us-ascii
...plain text version of message goes here....
--boundary42
Content-Type: text/richtext
.... richtext version of same message goes here ...
--boundary42
Content-Type: text/x-whatever
.... fanciest formatted version of same message
goes here
...
--boundary42--
In this example, users whose mail system understood the
text/x-whatever format would see only the fancy version, while
other users would see only the richtext or plain text version,
depending on the capabilities of their system.
Some mail reading programs that recognize more than one of the
formats will offer the user a choice of which format to view. This
makes sense, for example, if mail includes both a nicely formatted
image version and an easily edited text version. The point is that
multiple versions of the same data are not automatically shown.
Either the user is shown the last recognized version or explicitly
given the choice.
Multipart/Parallel
is syntactically identical to Multipart/Mixed. However, in a
parallel body, all of the body parts are intended to be presented
simultaneously on hardware and software that are capable of doing
so. Composing agents should be aware that many mail readers will
lack this capability and will show the parts serially in any event.
Multipart/Parallel will likely be used for multimedia messages
that combine such message types as text, audio and/or video.
Multipart/Digest
Indicates that each of the body parts is an RFC 822 mail message.
Multipart/Digest is syntactically identical to Multipart/Mixed,
except that the default Content-Type value for a body part is
changed from Text/Plain to Message/Rfc822.
Text
The text Content-Type is for sending material that is principally textual
in form. It is the default Content-Type. A Charset parameter may be
9
used to indicate the character set of the text. The default Content-Type
for Internet mail is text/plain; Charset=US-ASCII.
The value of the Charset parameter is not case sensitive. Allowable
values are US-ASCII, ISO-8859-1, ISO-8859-2, … and ISO-8859-9. The
default value for Charset is US-ASCII.
Text/Plain
indicates plain (unformatted) text. No special software is required
to get the full meaning of the text, aside from support for the
indicated character set. Other subtypes should be used for enriched
text in forms where application software may enhance the
appearance of the text, but such software must not be required in
order to get the general idea of the content. Possible future
subtypes include any readable word processor format.
Text/Richtext
indicates a simple portable word processing format that is defined
by the MIME standard. It is a very small subset of SGML. Mail
readers that implement Richtext may implement only a subset of
it.
When a mail composing program is given a file in a word
processing format to send and there is no standardized subtype for
that format, then the message composing program may reformat the
file into richtext format which will preserve more of the original
formatting information than reformatting the file to plain ASCII.
Video
indicates that the body contains a time-varying-picture image, possibly with
color and coordinated sound. The term Video is used very generically and
does not refer to any particular technology or format. It is not meant to
preclude subtypes such as animated drawings encoded compactly.
Video/Mpeg
indicates video coded according to the MPEG standard.
X-TypeName
This is any type name that begins with X-. A Content-Type value
beginning with X- is a private value, to be used by consenting mail systems
by mutual agreement. The standard specifies no subtypes.
No type may be specified without a subtype.
The standard allows the use of additional sub-types without having to change the
standard. However, it is important to insure that sub-types used by different user
communities of MIME do not conflict. It would be confusing if Content-Type:
application/foobar meant two different things. The standard specifies two
mechanisms for defining new Content-Type subtypes:
10
1. Private values (starting with X-) may be defined between cooperating mail
composing and reading programs without outside registration. Use of this
mechanism requires knowing that the reader of the message will not mistake the
content type for something other than originally intended.
2. New standard values must be registered with IANA. Where intended for public
use, the formats they refer to must also be defined by a published specification.
Messages that do not have a Content-Type field in their header are displayed by user
agents as if Content-Type: Text/plain; Charset=US-ASCII had been specified.
When a mail reader encounters mail with an unknown Content-Type value, it will
generally treat it as equivalent to application/octet-stream.
The Content-Transfer-Encoding Header Field
Many Content-Types which could usefully be transported via e-mail are represented, in
their “natural” format, as 8-bit character or binary data. Such data cannot be transmitted
over some transport protocols. For example, SMTP (Simple Mail Transfer Protocol is an
Internet standard for transporting e-mail defined by a document called RFC 821) restricts
mail messages to 7-bit ASCII data with lines no longer than 1000 characters.
MIME provides two mechanisms for re-encoding such data into a 7-bit short-line format.
The Content-Transfer-Encoding header field indicates the mechanism used to perform
such an encoding. The Content-Transfer-Encoding field indicates the transformation
that has been used to represent the body in an acceptable manner for transport.
The possible values for the Content-Transfer-Encoding field are:
BASE64
QUOTED-PRINTABLE
8BIT
7BIT
BINARY
x-EncodingName
These values are not case sensitive. That is, Base64, BASE64 and bAsE64 are all
equivalent. An encoding type of 7BIT requires that the body is already in a 7-bit mailready
representation. That is the default value: Content-Transfer-Encoding: 7BIT is
assumed if the Content-Transfer-Encoding header field is not present.
Both BASE64 and the QUOTED-PRINTABLE imply an encoding that consists of lines no
longer than 76 ASCII characters. In other respects the two encoding schemes are very
different.
The encoding scheme implied by QUOTED-PRINTABLE is most appropriate for data that
consists primarily of printable ASCII characters. Using this encoding method, printable
ASCII character are represented as themselves. The equals sign (=) serves as an escape
character. Any character that is not a printable or white space ASCII character is
11
represented as an equals sign followed by two hexadecimal digits. An equals sign in the
message is also represented in this way. Lines that are longer than 76 characters are cut
off after the 75th character and the line ends with a equals sign.
The advantages of using the QUOTED-PRINTABLE encoding for message that are mostly
printable ASCII characters are that few additional characters are required and the message
can be read by human beings who to not have a MIME aware mail reading program. As an
example, here is an EDI interchange in QUOTED-PRINTABLE encoding:
ISA*00* *00* *01*987654321 *12*8005551234 *910=
607*0111*U*00200*110000777*0*T*>
GS*PO*987654321*8005551234*920501*2032*7721*X*002003
ST*850*000000001
BEG*00*NE*MS1112**920501**CONTRACT#
REF*IT*8128827763
N1*ST*MAVERICK SYSTEMS
N3*3312 NEW HAMPSHIRE STREET
N4*SAN JOSE*CA*94811
PO1*1*25*EA***VC*TP8MM*CB*TAPE8MM
PO1*2*30*EA***VC*TP1/4*CB*TAPE1/4INCH
PO1*3*125*EA***VC*DSK31/2*CB*DISK35
CTT*3
SE*11*000000001
GE*1*7721
IEA*1*110000777
Except for the ISA segment having been wrapped onto two lines, the QUOTED-PRINTABLE
encoding of the interchange is identical to its 7BIT representation.
The BASE64 encoding mechanism is well suited for representing binary files. It represents
any sequence of three bytes as four printable ASCII characters. The same interchange as
shown above but using the BASE64 encoding would look like: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BASE64 bears some resemblance to uuencode in both appearance and function. However,
uuencode uses characters that may not be processed properly by an EBCDIC gateway.
The values 8bit, 7bit, and binary all imply that no encoding has been performed.
However, they are useful to indicate of the kind of data contained in the object, and
therefore of the kind of encoding that might need to be performed for transmission in a
given transport system. 7bit means that the data is all represented as short lines of ASCII
data. 8bit means that the lines are short, but there may be non-ASCII characters. Binary
means that not only may non-ASCII characters be present, but also that the lines are not
necessarily short enough for SMTP transport.
12
The difference between 8bit and binary is that binary does not require adherence to
any limits on line length. 8bit and binary are intended for compatibility with future
Internet e-mail transport standards and with gateways to non-Internet environments. As
of this writing there are no standardized Internet e-mail transports for which it is legitimate
to include unencoded 8-bit or binary data in mail bodies.
Note that the five values defined for the Content-Transfer-Encoding field imply
nothing about the Content-Type other than the algorithm by which it was encoded or the
transport system requirements if unencoded.
Some implementations may support additional Content-Transfer-Encoding values (it is
permitted but strongly discouraged by the standard). Any such additional values must
have names that begin with X- to indicate its non-standard status For example:
Content-Transfer-Encoding: x-my-new-encoding.
If a Content-Transfer-Encoding header field appears as part of a message header, it
applies to the entire body of that message. If a Content-Transfer-Encoding header
field appears as part of a body part's headers, it applies only to the body of that body part.
If a message or body part is of type Multipart or Message, the
Content-Transfer-Encoding must be 7bit, 8bit or Binary.
The encoding mechanisms defined here explicitly encode all data in ASCII. Thus, for
example, suppose a message or body part has header fields such as:
Content-Type: text/plain; charset=ISO-8859-1
Content-transfer-encoding: base64
This should be interpreted to mean that the body is a Base64 ASCII encoding of data that
was originally in ISO-8859-1, and will be in that character set again after decoding.
Optional Content-ID Header Field
It may be desirable to allow one body to reference another. Accordingly, bodies may be
labeled using the Content-ID header field, which is syntactically identical to the RFC 822
Message-ID header field: Content-ID values should be be as unique as possible.
Optional Content-Description Header Field
The ability to associate descriptive information with a body is often desirable. For
example, it may be useful to mark an Image body as “a picture of the Space Shuttle
Endeavor.” Such text may be placed in the Content-Description header field.
13
Summary
Using MIME-Version, Content-Type, and Content-Transfer-Encoding header fields,
it is possible to include arbitrary types of data objects in RFC 822 conformant mail
messages. No restrictions imposed by RFC 821 or RFC 822 are violated. MIME has been
designed to avoid problems caused by additional restrictions imposed by some Internet
mail transport mechanisms. The Multipart and Message content types allow mixing and
hierarchical structuring of objects of different types in a single message. Further content
types provide a mechanism for tagging messages or body parts as audio, image, or other
kinds of data. A parameter syntax allows further specification of data format details,
particularly the specification of alternate character sets. Additional optional header fields
provide mechanisms for certain extensions deemed desirable by many implementors.
Finally, a number of useful content types are defined for general use by consenting user
agents, notably Text/Richtext, Message/Partial, and Message/External-Body.
To promote interoperability between user agents, the MIME standard specifies a minimal
subset of MIME features a user agent must support to be considered MIME conformant.
A Complex Multipart Example
The outline of a complex multipart message follows. This message has five parts to be
displayed serially: two introductory plain text parts, an embedded multipart message, a
richtext part, and a closing encapsulated text message in a non-ASCII character set. The
embedded multipart message has two parts to be displayed in parallel, a picture and an
audio fragment.
MIME-Version: 1.0
From: Nathaniel Borenstein
Subject: A multipart example
Content-Type: multipart/mixed;
boundary=unique-boundary-1
This is the preamble area of a multipart message. Mail readers that
understand multipart format should ignore this preamble.
If you are reading this text, you might want to consider changing to
a mail reader that understands how to properly display multipart
messages.
--unique-boundary-1
Some text appears here...
[Note that the preceding blank line means
no header fields were given and this is text,
with charset US ASCII. It could have been
done with explicit typing as in the next part.]
--unique-boundary-1
Content-type: text/plain; charset=US-ASCII
This could have been part of the previous part, but illustrates
explicit versus implicit typing of body parts.
14
--unique-boundary-1
Content-Type: multipart/parallel; boundary=unique-boundary-2
--unique-boundary-2
Content-Type: audio/basic
Content-Transfer-Encoding: base64
… base64-encoded 8000 Hz single-channel
u-law-format audio data goes here …
--unique-boundary-2
Content-Type: image/gif
Content-Transfer-Encoding: Base64
… base64-encoded image data goes here…
--unique-boundary-2--
--unique-boundary-1
Content-type: text/richtext
This is richtext.Isn't it
cool?
--unique-boundary-1
Content-Type: message/rfc822
From: (name in US-ASCII)
Subject: (subject in US-ASCII)
Content-Type: Text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: Quoted-printable
… Additional text in ISO-8859-1 goes here …
--unique-boundary-1--
15


1 comment: